The application Adobe Reader is needed to view PDF files. If you do not have this application, download it from the Adobe Systems Incorporated website. n http://www.adobe.com/ For information on our latest products and peripheral devices, refer to the following Website: n http://www.toshibasecurity.com If the URL changes, refer to the Toshiba website (http://www.toshiba.com).
Introduction FCC (USA)-INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Thank you for purchasing the IK-WB80A Network Camera. Before you start using the camera, read this quick start guide carefully to ensure correct usage. Once you have finished reading this quick start guide, keep it in a convenient place for future reference.
Table of Contents Introduction ....................... 2 FCC (USA)-INFORMATION ..................2 Terms and Trademarks ....................3 Table of Contents....................4 Important Safeguards ..................5 Notes on Use and Installation................8 Setting the Network Camera Environment ............9 Items needed for network camera monitoring ............9 Package Contents ..................
Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the product and in the user's manual. 4.
Page 6
Important Safeguards (Cont.) 12. Lightning For additional protection on this camera during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the camera due to lightning and power-line surges.
Page 7
Important Safeguards (Cont.) CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
Notes on Use and Installation l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen.
Setting the Network Camera Environment Items needed for network camera monitoring l Administrator's personal computer The personal computer that allows setting, operating, monitoring and other functions with the network camera is called the "administrator's personal computer" in this guide. * The personal computer for viewing monitored images is called the "user's personal computer"...
Package Contents l IK-WB80A l Sun Shield Kit Wrench Tape Rubber pad l Wall Mount Bracket Kit l Waterproof Connector for RJ45 Wall Mount Plate Ethernet Enclosure Screw and Anchors Kit Wrench l Alignment Sticker / Silica Gel l AC adapter...
Physical Description Lens IR LED Light Sensor SD/SDHC Card Slot NOTE : When inserting an SD card, note the orientation of the contacts. General I/O Terminal Block Reset Button Status LED Power Cord Socket RJ45 Cable 11 11...
Hardware Installation Notes: l The attached screws and anchors are used to install the camera to a solid surface. (e.g. concrete) If installing to loose or thin material surfaces , use the appropriate anchors (not included) with the screws. l Install the camera tightly. Mounting the camera to a solid surface 1.
Page 13
Waterproof Connector Components of the Waterproof Connector Pin Definition 12V DC Output Digital Output Screw Nut (A) Digital Input Seal (B) Ground Seals (C) AC 24V AC 24V Housing (D) RS485 + Sealing Nut (E) RS485 - Microphone In 4 3 2 1 Ground Audio Out Ground...
Cabling Assembly RJ45 Cable Connector RJ45 Cable Dimension (unit: mm) Components of the Waterproof Connector Sealing Nut (A) Seal (B) Screw Nut (C) Housing (D) Gasket (E) Assembly Steps Insert the housing into the Insert the seal into the housing. Prepare an Ethernet cable screw nut.
Network Deployment Power over Ethernet (PoE) When using a PoE switch The Network Camera is PoE-compliant, allowing transmission of power and data via a single LAN cable. see the following illustration to connect the Network Camera to a PoE switch via LAN cable.
Assigning IP Address 1. Install the "Installation Wizard" under the Software Utility directory from the CD- ROM. 2. The program will analyze your network environment. After your network is analyzed, please click on the "Next" button to continue the program. Installation Wizard 3.
Retrieving Images 1. Access to the Network Camera from the network. ® 2. Retrieve live video through Internet Explorer 2010/09/01 16:34:42 For more information on camera configuration, please refer to user's manual on the CD-ROM.
Adjusting the Lens and Silica Gel 1. Unscrew the zoom controller to adjust the zoom factor. Upon completion, tighten the zoom controller. 2. Unscrew the focus controller to adjust the focus range. Upon completion, tighten the focus controller. 3. Tighten the lens cover. 4.
Completion 1. Tighten the supplied two screws. 2. Attach the supplied sun shield to the Network Camera and slide it to the desired position. 3. Fix the sun shield with the supplied two screws.
Page 20
TOSHIBA AMERICA INFORMATION SYSTEMS, INC. Surveillance & IP Video Products 9740 Irvine Boulevard, Irvine, CA 92618-1697 Phone Number: (877) 855-1349 625013000G...