Toshiba IK-WB11A Basic User's Manual page 20

Installing the Camera (IK-WB11A) (Cont.)
Connect the AC adaptor cable and LAN cable to
the camera
・The procedure is the same as that described in "Indoor Installation"
Step 3 on page 19.
Attach the camera to the rear cover
・The procedure is the same as that described in "Indoor Installation"
Step 4 on page 19.
・ Fix the camera to the rear cover from the sides using four M3 screws.
Important
Take care not to pinch the AC adaptor cable and the LAN cable when
●
attaching the camera to the rear cover.
Set the Sun visor
・ Fix the cover for outdoor installation in place from the rear using four
M4 screws.
Mount the camera directly to the wall using the wall
bracket (accessory)
NOTE
The screws which attach the wall bracket and the wall are not provided.
●
Choose the best screws for your wall when you buy screws at a store.
20
②
Provided M4 Screws
①