Enter the camera name
Important
The camera name is displayed along with images in single-view or multi-view
●
screens. If there are multiple cameras, enter a name that will make it easy to
identify what the camera is monitoring.
Set "DHCP" to "OFF"
・The default setting is "ON."
Enter the IP address, subnet mask, and default
gateway
Important
If you do not know the subnet mask, consult the provider or relevant network
●
system administration support center.
You do not need to enter the default gateway if the network camera will not
●
be accessed from another network. If you do need to enter a default gateway,
consult the relevant network system administration support center.
37