Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
NETWORK CAMERA
Model: IK-WB16A / IK-WB16A-W
Quick Start Guide and Important Safeguards
This guide describes the hardware installation.
IK-WB16A
Refer to the user's manual (PDF file) contained in the CD-ROM for settings, operations
and other information.
The application Adobe Reader is needed to view PDF files. If you do not have this
application, download it from the Adobe Systems Incorporated website.
For information on our latest products and peripheral devices, refer to the following
Website:
n http://www.toshibasecurity.com
If the URL changes, refer to the Toshiba website (http://www.toshiba.com).
IK-WB16A-W
Advertisement
Table of Contents
Related Manuals for Toshiba IK-WB16A
Summary of Contents for Toshiba IK-WB16A
-
Page 1: Network Camera
The application Adobe Reader is needed to view PDF files. If you do not have this application, download it from the Adobe Systems Incorporated website. For information on our latest products and peripheral devices, refer to the following Website: n http://www.toshibasecurity.com If the URL changes, refer to the Toshiba website (http://www.toshiba.com). -
Page 2: Introduction
Introduction FCC (USA)-INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 3: Terms And Trademarks
Thank you for purchasing the IK-WB16A/IK-WB16A-W Network Camera. Before you start using the camera, read this quick start guide carefully to ensure correct usage. Once you have finished reading this quick start guide, keep it in a convenient place for future reference. -
Page 4: Table Of Contents
Contents ......................13 Physical Description ..................14 Hardware Installation ..................15 Network Deployment ..................18 General Connection (without PoE) ................18 Power over Ethernet (PoE) (IK-WB16A only) ............19 Assigning IP Address ..................20 Retrieving Images................... 21 Configure the Wireless Connection (IK-WB16A-W only)........ 22... -
Page 5: Important Safeguards
IMPORTANT SAFEGUARDS 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the product and in the user's manual. 4. - Page 6 IMPORTANT SAFEGUARDS (Cont.) 10. Power Sources This video product should be operated only from the type of power source indicated on the information label. If you are not sure of the type of power supply at your location, consult your product dealer. 11.
- Page 7 20. When using a wireless LAN function (IK-WB16A-W): • Do not use near people with heart pacemakers. • Do not use near electronic medical equipment, or in hospitals or other medical institutions.
- Page 8 21. If the use of a wireless LAN function interferes with another device’s electromagnetic signals, cease use immediately. (IK-WB16A-W) The electromagnetic interference could cause a malfunction, resulting in an accident.
- Page 9 IMPORTANT SAFEGUARDS (Cont.) CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
-
Page 10: Notes On Use And Installation
NOTES ON USE AND INSTALLATION l Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. l Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. - Page 11 Caution when using the wireless LAN functions (IK-WB16A-W) The Wireless LAN in this unit uses the 2.4 GHz waveband. If there is a similar wireless LAN in the area, or a wireless device using the 2.4 GHz waveband, or a microwave oven, the communication efficiency of this apparatus will be reduced, and may become unusable, but it is not a fault.
-
Page 12: Setting The Network Camera Environment
Setting the Network Camera Environment Items needed for network camera monitoring l Administrator's personal computer The personal computer that allows setting, operating, monitoring and other functions with the network camera is called the "administrator's personal computer" in this guide. * The personal computer for viewing monitored images is called the "user's personal computer"... -
Page 13: Contents
Adobe Systems Incorporated website. For information on our latest products and peripheral devices, refer to the following Website: http://www.toshibasecurity.com If the URL changes, refer to the Toshiba website (http://www.toshiba.com/tai/products/ prod_biz.jsp). l Warranty Card l CD-ROM... -
Page 14: Physical Description
Front Panel Status LED Built-in Microphone Lens l Back Panel Ethernet 10/100 RJ45 Socket Audio Out Cable Clip Microphone In MicroSD/SDHC Card Slot General I/O Terminal Block microSD WPS/Reset Button WPS/RESET 4 3 2 1 Power Cord Socket Antenna (IK-WB16A-W only) -
Page 15: Hardware Installation
4. Slide the Network Camera into ceiling mount bracket B. 5. Secure ceiling mount bracket A and B with a small screw. 6. Attach the back cover and fasten with two screws. 7. Adjust the antenna to the appropriate position.(IK-WB16A-W only). - Page 16 NOTE l When RJ45 plug is large and the back cover is not attached to the camera, use an attached LAN cable and RJ45 female/female coupler. l When Microphone plug and Audio out plug are large and the back cover is not attached to the camera, use a right angle mini-plug cable.
- Page 17 4. Lead the cables through the hole, and connect the cable to the camera. Attach the back cover and fasten with two screws. 5. Secure Network Camera with two screws. 6. Adjust the antenna to the appropriate position. (IK-WB16A-W only)
-
Page 18: Network Deployment
Network Deployment General Connection (without PoE) 1. If you have external devices such as sensors and alarms, make the connections from general I/O terminal block. 2. Use Category 5 or equivalent Cable to connect the Network Camera to a network switch. Use Category 5 or equivalent Crossover Cable when Network Camera is directly connected to a PC. -
Page 19: Power Over Ethernet (Poe) (Ik-Wb16A Only)
Power over Ethernet (PoE) (IK-WB16A only) When using a PoE switch The Network Camera is PoE-compliant, allowing transmission of power and data to both run in a single Ethernet cable. See the following illustration to connect the Network Camera to a PoE switch via Ethernet cable. -
Page 20: Assigning Ip Address
4. After searching, the main installer window will pop up. Click on the MAC that matches the one labeled on the side of the camera lens to connect to the Network Camera. MODEL No. IK-WB16A DC INPUT:12V 0.8A This device complies with Part 15 of the FCC Rules. Operation is 00-02-D1-71-42-70 169.254.0.99... -
Page 21: Retrieving Images
Retrieving Images 1. Access to the Network Camera from the network. ® 2. Retrieve live video through Internet Explorer 2010/09/01 10:33:11 For more information on camera configuration, please refer to user's manual on the CD-ROM. -
Page 22: Configure The Wireless Connection (Ik-Wb16A-W Only)
1. SSID, abbreviated from Service Set Identifier, is the name assigned to the wireless network. The IK-WB16A-W's factory SSID setting is set to "default". 2. Select "Ad-Hoc" wireless mode if you want the IK-WB16A-W to communicate without using an AP or wireless router. - Page 23 Notes...
- Page 24 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. Surveillance & IP Video Products 9740 Irvine Boulevard, Irvine, CA 92618-1697 Phone Number: (877) 855-1349 625012400G...