Bus Parameters - Siemens SIMATIC PCS 7 FOUNDATION Fieldbus Commissioning Manual

Engineering
5.3 Parameter assignment
3. In the structure view, select the function block in which you want to change parameters and
make the desired changes in the parameter table.
4. Select the Station > Save menu command.
These changes are applied to the PCS 7 project.
Note
Offline parameter assignment data
SIMATIC PDM enables offline parameter assignment data to be downloaded to one or
more FF devices (download to devices) or enables device parameters to be uploaded from
the FF devices to the computer and saved on request (upload to PG/PC).
Additional information
● Manufacturer information of the FF device.
● Online help for SIMATIC PDM
5.3.2

Bus parameters

Note
Changing bus parameters
Faultless operation of the components on the FF subsystem is only ensured if the parameters
for the bus profile are compatible with each other. You should therefore only change the default
values if you are familiar with parameter assignment of the bus profile for FF.
42
FOUNDATION Fieldbus
Commissioning Manual, 02/2015, A5E32711026-AC