Description - S&P CTB ECOWATT Installation Manual. Instructions For Use

3"
+
ENTER PASSWORD:
1 1 1 OK
OK OK
CHANGE PASSWORD?
NO YES
OK OK
SETUP MENU
CHANNEL N:1 OK
OK OK
FACTORY SETTING?
NO YES
OK OK
Program OK
>
<Press any key
OK OK
• Turn off the device by ON/OFF switch in position "0"
• Access to the internal board again and position the micro switch SW2-1 in "OFF"
• The fan number change will be done when you restart the device

6.2. DESCRIPTION

The PROSYS ECOWATT is used as a visualization and control supplement. Following functions are possible:
• Display parameters and variables
• Save settings
• Display settings
• Confi gure your device and operating modes
• Search units (channels) in the network (previously each unit should be confi gured with different number of channels)
Press simultaneously for 3"
3
Enter the password
Default: 1 1 1
It is possible to assign a new password to your device
(channel)
Selection on which cannel you want to set the
configuration
Pres s on "YES"
Press any key to return to the main screen
37