Manual Operation Pag; Switching On/Off Manually Pag; Switch Lock Pag; Pre-Set Programs Pag - GE GLX+Q 1 1COM 16A 2M AST IR User Manual

MANUAL OPERATION
Switching on/off manually
Press the "C1" ("C2") key briefly to
switch the output relay 1 (relay 2, if
present).
The status that is reached will be main-
tained until the next program event.
Switch lock
Activating the lock function, all switches
are ignored. The relay remains in the
status in which it was found when the
lock was set.
➢ Press and hold "C1" ("C2") for 3
seconds to activate/deactivate the
relay 1 (relay 2, if present)
If the function is active, the following
symbol will appear .
PRE-SET PROGRAMS
GLX+Q 1 2COM 16A 2M AST IS is equipped with 6 pre-set programs
that allow you to program the instrument's night behaviour.
P1 program
This program sets
switch on at sunset
and switch off at dawn.
P1
Sunset
P2 program
This program keeps the relay in the off
position throughout the night.
P2
Sunset
- 10 -
User manual
(only for GLX+Q 1 2COM 16A 2M AST IR)
ON
OFF
Sunrise
ON
OFF
Sunrise