Paste Function Pag - GE GLX+Q 1 1COM 16A 2M AST IR User Manual

Paste function
To transfer a program from the remote control to one or more GLX+Q
AST, first:
➢ connect the GLX+Q AST clock to the mains network
➢ press the "R" key to reset
the instrument and activate
the reception mode. The following
message will appear on the
display
➢ activate the transmission on the
remote control and select which
program to send (see the instructions
for the remote control)
➢ during the transmission, the following
message will appear on the display
( on the remote
control display) and the remote control will emit "bips".
When completed, the following message is displayed
.
Note: during transmission, point the remote control towards the
front of the instrument to facilitate the transmission. A possible
problem with the transmission is signalled with the message
At this point, the programs and date
and time settings are transferred to the
instrument and it is ready to operate with
the transferred parameters.
C1 C2 Ok
R
- 24 -
User manual
on the clock's display.