Position Menu Pag - GE GLX+Q 1 1COM 16A 2M AST IR User Manual

The default values for the time change are:
- winter Ò summer change: last Sunday in March, 2:00 am
- summer Ò winter change: last Sunday in October 3:00 am
During normal operation, the symbol
during the CET period (winter) and the symbol
the DST period (summer).
POSITION menu
This menu is used to change the geographical coordinates (latitude,
longitude, time zone) that were set during the installation phase.
To change a parameter:
➢ Select SETTINGS POSITION
with "C1" and "C2" and press
"Ok" to confirm
➢ If Italian is set as the
language, it is possible to
select to change only the
province or make a change
using the geographical
coordinates:
will appear on the display
will appear during
C1
C1 C2 Ok
R
- if you want to change the province, select
CAPITAL POSITION and press "Ok". The
currently set province will be displayed:
press "Ok" to access the change mode
and select the new province with "C1"
and "C2" and confirm with "Ok". At
this point the message
displayed to indicate the change that was
made.
➢ Select the parameter
to change from among
latitude, longitude or time
zone and press "Ok" to
confirm
➢ The parameter value is
displayed:
press "Ok" to access
C2 Ok
R
the change mode
➢ Set the new value with
"C1" and "C2" and
press "Ok" to confirm.
➢ The following message will appear
on the display
- 19 -
User manual
will be
C1
C1 C2 Ok
R
C1 C2 Ok
R
.
C2 Ok
R
C1 C2 Ok
R