Menu Holiday Program Pag; Creating A Holiday Program Pag - GE GLX+Q 1 1COM 16A 2M AST IR User Manual

2. Menu HOLIDAY PROGRAM
2.1 Creating a HOLIDAY program
From the normal operating status:
➢ Press " "
➢ Select PROGRAM with "C1" and "C2"
and confirm with "Ok"
➢ Select PROGRAM HOLIDAY with
with "C1" and "C2"
and confirm with "Ok"
➢ Select HOLIDAY NEW
and confirm with "Ok"
➢ Choose the relay onto which
to carry out the
programming
➢ Select between HOLIDAY ONE DAY
(single day) or HOLIDAY PERIOD
(multiple contiguous days)
with "C1" and "C2"
➢ Enter the date (holiday day) or
the holiday day interval (holiday
period).
C1
R
C1 C2 Ok
R
Note: the first and last date are
to be considered included in the
holiday period
➢ Press "Ok" to confirm
Once the programming is confirmed,
the following message will appear
on the display
During normal operation, the possible
execution of a holiday programme is
signalled by the symbol
the display.
C2 Ok
Note: recursive function
At this point, the instrument activates the
recursive function that makes is possible
to program multiple holiday days in series
(or holiday periods).
If you do not want to enter another
holiday day (or period) press " " to end
programming.
The correlation of the programmed
holiday events is not controlled with the
recursive function: the function must
therefore be considered as facilitated
programming.
- 14 -
User manual
.
in field (7) on