Setup Flow; Setup Flow For Windows; For Smb Printing - Toshiba GA-1120 Operator's Manual

SETUP FLOW

After completing each procedure, please mark the checkbox (
that you can make sure completed each step for setup.

For SMB Printing

Connecting the GA-1120/GA-1130
Connect the GA-1120/GA-1130 to your network with a network cable.
REFERENCE
MCONFIGURATION GUIDE
MChapter 1: Connecting to the Network
➤ Connecting network cable to the GA-1120/GA-1130
Setting up TCP/IP
Configure the TCP/IP Setup options to assign the IP Address, Subnet Mask, and Gateway
Address on the GA-1120/GA-1130 to enable Fiery WebSetup from the Control Panel.
REFERENCE
M CONFIGURATION GUIDE
M Chapter 4: Performing Setup from the Control Panel
M Network Setup options
M Protocol Setup options
➤ TCP/IP Setup options
Setting up the Printing Service
Configure the Windows Print Sharing to enable the Windows Printing Service from Fiery
WebSetup or Command WorkStation.
REFERENCE
M CONFIGURATION GUIDE
M Chapter 5: Setting up the GA-1120/GA-1130 from a Windows Computer
M Network Setup
➤ Windows Print Sharing (SMB)
4

Setup Flow for Windows

) in front of each procedure so