Toshiba GA-1120 Operator's Manual page 60

4
Select each
configuration of the GA-1120/GA-1130 printer
and click on [OK].
Copier Type
This sets whether or not the Automatic Duplexing Unit is installed.
Color-MFP - Select this when the Automatic Duplexing Unit is not installed.
Color-MFP-ADU - Select this when the Automatic Duplexing Unit (MD-5007) is installed.
Large Capacity Feeder
This sets whether or not the Large Capacity Feeder is installed.
Not Installed - Select this when the Large Capacity Feeder is not installed.
Installed - Select this when the Large Capacity Feeder (MP-1503LT or MP-1503A4) is
installed.
Sorter and Stapler
This sets whether or not the Finisher is installed.
Not Installed - Select this when the Finisher is not installed.
Finisher with Saddle Stitcher - Select this when the Finisher with Saddle Stitcher (MJ-
1020) is installed.
Finisher with Stapler - Select this when the Finisher with Stapler (MJ-1019) is installed.
Punch Option
This sets whether or not the hole punch unit is installed. This can be selected when "Finisher
withe Saddle Stitcher" or "Finisher with Stapler" is selected at "Sorter and Stapler".
Not Installed - Select this when no hole punch unit is installed.
2 hole Punch Unit - Select this when the 2 Hole Punch Unit (MJ-6002E) is installed.
2/3 hole Punch Unit - Select this when the 2/3 Hole Punch Unit (MJ-6002N) is installed.
4 hole Punch Unit (F) - Select this when the 4 Hole Punch Unit (F) (MJ-6002F) is installed.
4 hole Punch Unit (S) - Select this when the 4 Hole Punch Unit (S) (MJ-6002S) is installed.
58
option according to the