Connector Kit Overview - Keysight Technologies X Series User Manual

1 Keysight Connector Kit

Connector Kit Overview

Connector Kit Overview
The N9041B, Signal Analyzer has two input connectors, the right side RF Input 1
connector is a 2.4 mm male.
The left side RF Input 2 connector is a special 1.0 mm male Keysight bulk head
connector that has 14 mm wrench flats. This test port connector has external
threads that accept the Keysight Test port adaptors, and has internal threads that
will accept Keysight standard 1.0 mm female adaptor, such as the 11920B.
The Connector Kit contains:
Adaptor - 2.4 Female to K Female
Adaptor 2.4 mm Female- 2.4 mm Female
1 mm female test port to 1 mm female adaptor
1 mm female test port to 1.85 mm female adaptor
Torque Wrench
Connector Vise for RF Input 2
Open ended wrenches required (not supplied)
– 7 mm (Used on 11900B and 11904B)
– 8 mm (Used on Y1901B)
– 12 mm (Used on Y1900B)
6
Used on RF Input 1 as a connector saver to
connect 3.5 mm or sma devices or cables.
Used on RF Input 1 as a connector saver
Used on RF Input 2 as a connector saver
Used on RF Input 2 as a connector saver and to
connect 1.85 mm devices or cables
Double ended wrench with 10 inch-pound (setting
for test port adaptors) and 4 inch-pound (setting
for Keysight standard 1 mm adaptors)
If the test port adaptors cannot be used, this vise
will help secure a Keysight standard 1 mm female
adaptor to the instrument RF Input 2 connector.
User's Guide