Cleaning Connectors; Basic Cleaning Procedure - Keysight Technologies X Series User Manual

Connector kit, signal analyzer

Hide thumbs Also See for X Series:

Table of Contents

2 Connector Care

Cleaning Connectors

1. Inspect the connectors for dust, dirt, metal fragment, oils or film, and debris.

2. Blow off any dust with a filtered, clean supply of compressed air.

3. Add a few drops of high-purity isopropyl alcohol to a small cleaning swab (do not

5. Gently wipe connecting surfaces with the end of the cleaning swab.

6. Blow dry with compressed air.

7. Inspect and repeat cleaning procedure if necessary.

apply alcohol directly to the parts).

4. When using isopropyl alcohol to clean connectors do not allow the

liquid to flow down inside the connector. This may cause

measurement errors due to residue inside the connector. If possible

keep the connector facing down.

User's Guide

Table of Contents

N9041b uxa