Otto Bock OC1560 EasyFit Arm Instructions For Use Manual page 7

NOTICE
Mechanical overload
Impaired functionality due to mechanical damage
► Check the product for damage prior to each use.
► Do not use the product if its functionality has been impaired.
► Take any necessary measures (e.g. repair, replacement, inspection by
the manufacturer's customer service, etc.).
4 Handling
4.1 Application
NOTICE
Use of powder (e.g. baby powder, talcum)
Loss of function of prosthetic components due to clogging with particles or
deprivation of lubricant
► Avoid contact with powders.
1) Fully spread out the donning sheath (see Fig. 1).
2) Turn one half of the donning sheath into the other half, so that the strap
is facing out (see Fig. 2).
3) Pull the donning sheath over the residual limb, avoiding any wrinkles
(see Fig. 3).
4) Slide into the prosthetic socket and guide the pull-through aid through
the valve opening on the prosthetic socket.
5) Pull the donning sheath out through the valve opening on the prosthetic
socket (see Fig. 4).
INFORMATION
► Perform light pumping movements with the residual limb to aid donning
the prosthetic socket.
► Pull on different parts of the material to ensure that the soft tissue is
evenly distributed.
4.2 Cleaning
NOTICE
Use of improper cleaning agents
Damage to the product due to use of improper cleaning agents
► Only clean the product with the approved cleaning agents.
Ottobock | 7