Introduction; Qualified Persons; Read This Instruction Sheet; Retain This Instruction Sheet - S&C TripSaver II Installation, Operation, And Configuration

Cutout-mounted recloser
Hide thumbs Also See for TripSaver II:
Table of Contents

Advertisement

Introduction

Qualified Persons

Read this
Instruction Sheet
Retain this
Instruction Sheet

Proper Application

Warranty

2
S&C Instruction Sheet 461-509
The equipment covered by this publication must be installed, operated, and
maintained by qualified persons who are knowledgeable in the installation,
operation, and maintenance of primary overhead distribution equipment along with
associated hazards . A qualified person is one who is trained and competent in:
• The skills and techniques necessary to distinguish exposed live parts from nonlive
parts of electrical equipment
• The skills and techniques necessary to determine the proper approach distances
corresponding to the voltages to which the qualified person will be exposed
• The proper use of special precautionary techniques, personal protective
equipment, insulated and shielding materials, and insulated tools for working on
or near exposed energized parts of electrical equipment
These instructions are intended ONLY for such qualified persons . They are
not intended to be a substitute for adequate training and experience in safety
procedures for this type of equipment .
Thoroughly and carefully read this instruction sheet before installing, operating
or configuring your TripSaver II Communications via Gateway system . The latest
version is available online in PDF format at sandc.com/en/support/product-
literature/ . Familiarize yourself with Safety Information and Safety Precautions on
pages 3 and 4 .
This instruction sheet should be available for reference wherever the TripSaver II
Communication via Gateway system is used. Retain this instruction sheet in a location
where you can easily retrieve and refer to it.
The equipment in this publication is only intended for a specific application . The
application must be within the ratings furnished for the equipment . Ratings for the
TripSaver® II Communication Gateway are listed in Specification Bulletin 461-33 .
The ratings are also on the S&C nameplate affixed inside the product .
The warranty and/or obligations described in S&C's standard conditions of sale, as set
forth in Price Sheet 150, plus any special warranty provisions, as set forth in the applicable
product-line specification bulletin, are exclusive. The remedies provided in the former
for breach of these warranties shall constitute the immediate purchaser's or end user's
exclusive remedy and a fulfillment of all the seller's liability. In no event shall the seller's
liability to the immediate purchaser or end user exceed the price of the specific product
that gives rise to the immediate purchaser's or end user's claim. All other warranties,
whether express or implied or arising by operation of law, course of dealing, usage of
trade or otherwise, are excluded. The only warranties are those stated in Price Sheet 150,
and THERE ARE NO EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. ANY EXPRESS WARRANTY OR OTHER
OBLIGATION PROVIDED IN PRICE SHEET 150 IS GRANTED ONLY TO THE IMMEDIATE
PURCHASER AND END USER, AS DEFINED THEREIN. OTHER THAN AN END USER,
NO REMOTE PURCHASER MAY RELY ON ANY AFFIRMATION OF FACT OR PROMISE
THAT RELATES TO THE GOODS DESCRIBED HEREIN, ANY DESCRIPTION THAT
RELATES TO THE GOODS, OR ANY REMEDIAL PROMISE INCLUDED IN PRICE
SHEET 150.
WARNING
NOTICE
WARNING

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TripSaver II and is the answer not in the manual?

Table of Contents