Status And Prompt Messages - Toshiba e-STUDIO28 Operator's Manual

TOSHIBA e-STUDIO28/35/45 Unix Printer Driver
Message
You must be 'root' (superuser) to install.
ERROR: The default folder for manpage of
<manpage> does not exist.
ERROR: Printer queue <printqueue> already
exists.

Status and Prompt Messages

Message
Un-install another queue? y/N
Print Queue Name:
Select print queue to delete [choice(s): 1-n]
Validating <printqueue>
Validating <destinationname>
Destination server:
Further setup customization:
Default remote print queue: <remoteprintqueue>
Change destination print queue? y/N
Specify a destination print queue? y/N
Specify name of destination remote queue:
Default network printer port:
Change destination printer port? y/N
Specify a destination printer port? y/N
Specify name of destination printer port:
Install Manpages? y/N
Set as default? y/N
User's Guide
Possible Cause
"superuser" access is needed to be able
to install the printer driver.
The manpage cannot be installed because
the path for the manpage cannot be
found or accessed.
Print queue that is passed as parameter as
print queue to be installed is already in
the system.
Description
Asks whether to try to un-install other
detected print queues. Default is No.
Prompting for the print queue, as it is not
specified in the command line
parameter.
Ask for which detected print queue to un-
install.
Status message when checking if print
queue is not yet installed in the system.
Status message when checking if network
printer or remote server exists in the
system.
Prompt for name of network printer or
remote server to associate the print
queue that is to be installed.
Status message that implies more prompts
to follow.
Identifies the current default print queue.
Asks whether to specify another remote
print queue or use default print queue.
Default is No.
Asks whether to name a destination print
queue or not. Default is No. This should
never appear. This is added as a
precautionary measure only if the
default remote print queue was not
detected.
Prompts for name of new destination print
queue.
Identifies the current default printer port.
Asks whether to specify another destination
port or use default port. Default is No.
Asks whether to name a destination port or
not. Default is No. This should never
appear. This is added as a
precautionary measure only if the
default printer port was not detected.
Prompts for name of new destination
printer port.
Asks whether to install the manpages or
not. Default is No.
Asks whether to set the installed print
queue as the system's default print
40