Table of Contents
Advertisement
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver
Status Dialog
The Status dialog shows messages
describing the progress of the installation
process.
The Done button closes the dialog after a
successful installation or after an error
occurs during installation. It is disabled
during the install process.
If a fatal error occurs, the setup
installation program terminates.
Figure 6 Help dialog
Text Mode
If the program fails to detect support for X-Windows in the Unix/Linux system, or if
g:no is specified in the command line parameters, the program will run in Text
mode.
Installation mode
Usage: ./install [[q:]<queue>] [s:<server>] [p:<portvalue>]
The g:no parameter launches the installation program in Text mode.
If <queue> and <server> is not specified, the installation program will prompt for
them. If <portvalue> is not specified, the program will show the default, which is
"print", and will ask if a different value will be used. If <insttype> is not specified,
the default installed print queue type is "server".
User's Guide
Figure 5 Status dialog
Help Dialog
The help button shows the help dialog,
which describes the setup installation
program. The text displayed in this dialog
is taken from the Setup.txt that is
shipped with the driver.
[t:<insttype>] g:no
14
Advertisement
Table of Contents
