Table of Contents
Advertisement
TOSHIBA e-STUDIO28/35/45 Unix Printer Driver
Feature
Keyword:Option
Duplex
duplex:<param>
single
long
short
Relay
relay:<param>
on
off
Options list
options:<param>
on
off
Language
language:<param>
selection
postscript
Text mode
text:<param>
on
off
Pesc mode
pesc:<param>
on
off
User's Guide
Non-native form
simplex
duplex, double, vd, d
hduplex, hd
relay
options, optionson
optionsoff
post, postscript
text, texton, ascii
textoff
pesc, pescon
pescoff
Description
For simplex, print single sided. If not
specified, the printer's front panel
sets the default to either simplex or
duplex.
For duplex and hduplex, print double
sided with long-edge binding, short-
edge binding.
This command is defined in the
configuration file.
CORE option only. This feature allows
the CORE driver to print a formatted
file with some PJL commands added
in the print job header and footer.
These PJL commands can be finishing
options that will be applied to the
page on the engine at print time.
CORE option only. Lists all available
options.
Force language to PostScript mode.
Only the PDL for the specific build is
valid. For example, if the driver is a
PostScript build, post is the only
valid parameter.
To use PCL5, use the PCL5 Unix driver
build.
To use PCL6, use the PCL6 Unix driver
build.
CORE option only. In PostScript, print
text, without interpreting it. In non-
PostScript, add CR for each LF.
This option allows the CORE driver to
pass data to the printer without
adding any extra commands.
Same as Text Command.
34
Advertisement
Table of Contents
