When Using The Reversing Automatic Document Feeder (Optional) - Toshiba E-STUDIO E-Studio 3511 Operator's Manual

2.SETTING ORIGINALS (Cont.)

When Using the Reversing Automatic Document Feeder (optional)

Precautions for Using the Reversing Automatic Document Feeder
Do not use the following type 1 to 8 of originals as they may misfeed or become damaged:
1 : Only originals with the same width can be set at a time. (Do not mix originals with different widths.)
2
2 : Badly wrinkled or folded originals; in particular, originals whose leading edge is curled may fail to be
correctly fed.
3 : Originals with carbon paper
4 : Taped, pasted or clipped (cut out) originals
5 : Clipped or stapled originals
6 : Originals with holes or tears ones
7 : Damp originals
8 : OHP film originals
* Do not use tracing paper, permeable paper and coating paper (coating with wax, etc.).
Also, the following type 9 and 10 of originals should be handled carefully:
9 : Originals, 2 of which, when pinched between 2 fingers, cannot be moved, or originals that are surface-
treated may fail to separate properly.
10: Folded or curled originals should be smoothed before being used.
* The different sized originals are limited for setting. "Mixed-sized Originals"
1
5
If the scanning area and guide area are dirty, it may cause black streaks, etc. on the printed paper. Cleaning
them preferably once a week is recommended. See "Weekly Maintenance"
50
2.HOW TO MAKE COPIES
2
8 9
3
6
Page 72
4
7
10
Page 288