Continuous/Single Original Feeding - Toshiba E-STUDIO E-Studio 3511 Operator's Manual

15. CONTINUOUS/SINGLE ORIGINAL FEEDING

When using the optional reversing automatic document feeder, you can select the continuous feed mode
(default setting) so that multiple (or single) originals are continuously fed in one by one, or the single feed
mode where an original is automatically pulled in when you insert it and starts being copied.
* When setting the different size of originals "Mixed-sized Originals"
Continuous Feed Mode
1
Place paper in the drawer(s).
- "1.SETTING COPY PAPER"
2
Place the original(s) on the reversing
5
automatic document feeder (optional).
- "When Using the Reversing Automatic Document Feeder
(optional)"
3
Press the [EDIT] button to enter the edit
menu, and then press the [ADF] button.
- If the desired function buttons are not displayed, press the [NEXT]
button to change the menu screen.
4
Press the [ADF] button.
Select other copy modes as required.
5
Press the [START] button.
When the number of originals is too large to be set at one time, you
can divide the originals into 2 to 10 sets and set them one after
another. To do so, place the first set of originals first, and press the
[CONTINUE] button while the scanning is in progress. After they
have been scanned, place the next set of originals that should be
scanned.
134
5.USING THE EDITING FUNCTIONS
Page 38
Page 50
Page 72