Functions Cannot Be Set; Images Are Partially Missing - Toshiba E-STUDIO E-Studio 3511 Operator's Manual

2.SIMPLE TROUBLESHOOTING (Cont.)

Images are Partially Missing

Item to be checked
Are the original size and
direction, as well as the
reproduction ratio suitable for
the paper size?
Is the margin on the copy set
properly?

Functions cannot be Set

Item to be checked
Are there functions that cannot
be combined set together?
Desired Color does not Appear
Item to be checked
Has the message "Install new
toner cartridge" appeared on
the screen?
Has the "CALL SERVICE"
message appeared on the
screen?
Is the paper moist?
13
Is the level of the image density
and color adjustment correct?
292
13.MAINTENANCE
Countermeasure
Select copy paper of the same
size as the original, or set the
reproduction ratio suitable for
the paper size.
Adjust the image shift value.
Countermeasure
See the Copying Function
Combination and Image Quality
Adjustment Combination
Matrices and set again.
Countermeasure
Replace the toner cartridge.
Call your service technician.
Replace with new paper.
Reset the image density and
color adjustment to the standard
settings. If the color still deviates
slightly, perform calibration.
Reference page
"1.PAPER SELECTION"
"3.REDUCTION AND
ENLARGEMENT COPYING"
Page 74
"1.IMAGE SHIFT" Page 108
Reference page
"4.COPYING FUNCTION
COMBINATION MATRIX"
305, "5.IMAGE QUALITY
ADJUSTMENT COMBINATION
MATRIX" Page 307
Reference page
"3.REPLACE TONER CARTRIDGE
SYMBOL" Page 250
"9.CALL SERVICE SYMBOL/
PERIODIC MAINTENANCE
MESSAGE" Page 286
"2.ADD PAPER SYMBOL"
248
See the [User Functions Guide].
Page 68.
Page
Page