Toshiba E-STUDIO E-Studio 3511 Operator's Manual page 149

4
Set the scanning conditions using the
buttons on the touch panel and the digital
keys.
- Press the [Next] or [Prev] button to switch the screen and make
necessary settings. After having completed all the settings, press
the [ENTER] button.
5
Press the [SCAN!] button.
6
"To continue, place document on glass.
And press the Scan!" appears. If you want
to continue scanning, press the [SCAN!]
button. If you want to finish scanning,
press the [JOB FINISH] button.
- When the original is set on the reversing automatic document
feeder (optional) to be scanned in the Continuous Feed mode,
this screen is not displayed.
- If you want to cancel the storage of the scanned data, press the
[JOB CANCEL] button.
- You can change the setting of the original type and scanning
conditions using the [EDIT] button before pressing the [SCAN!]
button.
7
147