Toshiba E-STUDIO E-Studio 3511 Operator's Manual page 56

3.GENERAL COPYING PROCEDURES (Cont.)
2
Place the original(s).
- "Acceptable Original Types and Sizes/Maximum Number of
Sheets that can be Stored"
2
- "When Placing an Original on the Glass"
- "When Using the Reversing Automatic Document Feeder
(optional)"
When the reversing automatic document feeder (optional) is
installed and the single feed mode is selected, place the original(s)
after the copy mode is set.
3
Select the copy modes as required.
- Copy modes cannot be changed after the [START] button is
pressed (including the case when originals are divided into
multiple sets when fed).
- Selecting multiple copy modes may be restricted depending on
their combination.
4
Press the [START] button.
- Copying starts.
To copy the original, which is placed on the original glass, after
scanning and storing it in the memory (sort mode, 1-side original to
2-sided copies, etc.), follow step 5 and 6.
54
2.HOW TO MAKE COPIES
Page 47
Page 50
Page 48