Toshiba E-STUDIO E-Studio 3511 Operator's Manual page 14

GENERAL PRECAUTIONS (Cont.)
Caution
- DO NOT tilt the multifunctional digital color systems more than 10 degrees when moving it. If it falls, this
could result in personal injury.
- Avoid placing the multifunctional digital color systems in a place unsuitable for its weight and also make
sure the surface is level.
Remember that if the multifunctional digital color systems falls over, serious injuries could result.
Weight of the multifunctional digital color systems: approx. 247 lb.
- There are 4 adjusters (stoppers) on both sides (2 adjusters each) and 2 safety stoppers in front at the
bottom of the paper feed pedestal and the large capacity feeder. After moving and installing the
equipment, be sure to turn the adjusters clockwise to fix them firmly on the floor as shown in the
illustration. Then fix the safety stoppers in the same way.
If they are not adjusted correctly and the equipment falls, this could result in personal injury
To move the equipment, turn the safety stoppers and the adjusters counterclockwise.
- When connecting the optional equipment and interface cable to the multifunctional digital color systems,
be sure to turn the power OFF. If the power is not turned off, you could get an electric shock.
To turn the power OFF, see "Turning off the Power (Shutting down)"
12
Page 32.