Toshiba E-STUDIO E-Studio 3511 Operator's Manual page 270

5.CLEAR PAPER SYMBOL (Cont.)
11. Paper Misfeed in the Single-Staple Finisher (optional: MJ-1022)
1
Pull the lever and move the finisher
carefully away from the copier.
2
Lift the green lever and remove any
misfed paper.
3
Remove any misfed paper in the paper
exit area.
4
Install the finisher to the equipment.
Be careful not to let your fingers be caught between the equipment
and the finisher (optional).
This could injure you.
12
268
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL