Seat Belt Pretensioner - Suzuki Wagon R RB310 Supplementary Service Manual

1
3, (a)
1
1
INSTALLATION
CAUTION:
Proper operation of side sensor requires sensor be rig-
idly attached to vehicle structure.
1) Check that none of following faulty conditions exists.
• Bend, deformity or rust of under body.
• Foreign matter on mating surface of sensor.
2) Install side sensor (1) on under body (2) and tighten side
sensor bolt (3) to specified torque.
Tightening torque
2
Side sensor bolt (a) : 9 N·m (0.9 kg-m, 6.5 lb-ft)
3) Push connector inner (1) until side sensor is connected as
shown.
4) Connect negative cable at battery.
5) Enable air bag system. Refer to "ENABLING AIR BAG SYS-
TEM" in this section.

Seat Belt Pretensioner

Refer to "FRONT SEAT BELT" in Section 10 for removal, inspec-
tion and installation.
AIR BAG SYSTEM 10B-79