Suzuki Wagon R RB310 Supplementary Service Manual page 211

10B-58 AIR BAG SYSTEM
DTC WILL SET WHEN
DTC B1081 or B1085 :
The combined resistance of the side air bag (inflator) module (driver or passenger side), harness wiring and
connector terminal contact is above a specified value for specified time.
DTC B1082 or B1086 :
The combined resistance of the side air bag (inflator) module (driver or passenger side), harness wiring and
connector terminal contact is below a specified value for specified time.
DTC B1083 or B1087 :
The voltage measured at side air bag (driver or passenger side) initiator circuit is below a specified value for
specified time.
DTC B1084 or B1088 :
The voltage measured at side air bag (driver or passenger side) initiator circuit is below a specified value for
specified time.
TABLE TEST DESCRIPTION
DTC B1081, B1082, B1083, B1084, B1085, B1086, B1087,or B1088 :
STEP 1 : Check whether malfunction is in side air bag (inflator) module.
STEP 2 : Check side air bag initiator circuit in instrument panel harness.
DIAGNOSTIC FLOW TABLE
DTC B1081 : Side Air Bag (Driver Side) Initiator Circuit Resistance High
DTC B1085 : Side Air Bag (Passenger Side) Initiator Circuit Resistance High
Step
1 1) With ignition switch OFF, disconnect side air
bag (inflator) module connector "G69" or
"G70" under front seat cushion.
2) Check proper connection to applicable side
air bag (inflator) module at terminals in
"G69" or "G70" connector.
3) If OK, then connect Special tools (B) and
(C) to side air bag (inflator) module connec-
tor "G69" or "G70" disconnected at the step
1).
With ignition switch ON, is DTC B1081 or
B1085 still current?
Action Yes
Go to step 2.
No
Ignition switch OFF.
Replace applicable front
seat back referring to
"FRONT SEAT" in Section
9.