Using The Maintenance Timeout Function; Maintenance Timeout - Toro 24 User Manual

Using the Maintenance Timeout Function

The MaintenanceTimeout feature enables a time period ranging
from 0.5 to 8.0 hours to be set, then selectedas required. During
the timeout period, the leak detection function is disabled and
the normally-closed master valve is energized. A typical use of
the Maintenance Timout function would be to facilitate quick-
coupler irrigation.
Turn the Function dial to the blank position, located
1.
between Flow and Reports.

MAINTENANCE TIMEOUT

Skip
2. Turn the Lower Line dial to Edit.
3. Turn the Upper Line dial one click.
4. Turn the Lower Line dial to ON.
5. Turn the Upper Line dial to highlight Time.
6. Turn the Lower Line dial to set timeout duration (0.5–8.0 hours).
56