Table of Contents
Advertisement
Using the Copy Function
The Copy function provides a convenient method of transferring
all watering program information from one station to another or to
all active stations simultaniously. Minor changes can then be made to
each station as needed, greatly simplifying the process of programming
several stations with similar watering progam attributes.
The Copy function also serves as a means of quickly resetting all user-
defined Setup, Schedule and Program settings back to the factory-default
values. The default values can be reapplied to selected stations or all
stations simultaniously as needed.
Copying Station Information
Turn the Function Selector knob to COPY to view the following
1.
display:
COPY FROM STA 01
To STA 02
Turn the Upper Line knob to select the source station number.
2.
Note: The number of active stations defined in the Setup function,
determines the number of stations that can be selected.
3.
Turn the Lower Line knob to select the destination station number.
To select All Stations, turn the Lower Line knob one stop past the
highest station number, as shown in the following display:
COPY FROM STA 01
To ALL STA's (Press COPY)
4.
Press and hold the COPY button. Release the button when
COPYING DONE! is displayed.
COPYING
38
(Press COPY)
DONE!
Advertisement
Table of Contents
