Using The Copy Function; Copying Station Information - Toro TIS-240 User Manual

Using the Copy Function

The Copy function provides a convenient method of transferring
all watering program information from one station to another or to
all active stations simultaniously. Minor changes can then be made to
each station individually as needed, greatly simplifing the process of
programming several stations with similar watering progam attributes.
The Copy function also serves as a means of quickly resetting all user-
defined Setup, Schedule and Program settings back to the factory-default
values. The default values can be reapplied to selected stations or all
stations simultaniously as needed.

Copying Station Information

1. Turn the Function Selector knob to COPY to view the following
display:
COPY FROM STA 01
To STA 02
2. Turn the Upper Line knob to select the source station number.
Note: The number of active stations defined in the Setup function,
determines the number of stations that can be selected.
3. Turn the Lower Line knob to select the destination station number.
To select All Stations, turn the Lower Line knob one stop past the
highest station number, as shown in the following display:
COPY FROM STA 01
To ALL STA's (Press COPY)
4. Press and hold the COPY button. Release the button when
COPYING DONE! is displayed.
COPYING
38
(Press COPY)
DONE!