Table of Contents
Advertisement
Set Runtime Valve Test Option
The controller features a Valve Test feature that will test each station
for a short-circuit condition each time it is activated. If a fault is detected,
an Alert will be posted, enabling identification and repairs to be made.
1. Within the Setup menu, turn the Upper Line knob to view the
following display:
RUNTIME VALVE TEST
No (Check Fuse Often)
2.
Turn the Lower Line knob to select Yes or No as preferred.
Set Maximum Backup ET
The Maximum Backup ET value is a failsafe measure used by the
controller to calculate daily watering requirments in the event that
current ET Everywhere data is not recieved for an extended period.
The Maximum Backup ET default value of 2.00 is automatically
entered to help compensate for seasonal weather changes.
Note: The Maximum Backup ET is adjustable from 0.50 – 3.99 .
The whole number is only adjustable to 0 when the decimal
number value is .50 or higher.
1.
Within the Setup menu, turn the Upper Line knob to view the
following display:
MAX BACKUP ET Part 1
2.00
2.
The whole number of the Maximum Backup ET value is selected
by default. To adjust the value from 1 – 3, turn the Lower Line
knob.
Turn the Upper Line knob right one stop to select the decimal
3.
number.
4.
Turn the Lower Line knob to adjust the decimal number value.
15
Advertisement
Table of Contents
