Select Number Of Cycles; Set Soak Time - Toro 24 User Manual

Select Number of Cycles

1. Turn the Upper Line knob to select Number of Cycles.
NUMBER OF CYCLES
01 Cycles/Operating Day
2. The number of watering cycles per watering day is set to 1 by
default. To adjust the number between 0 – 20 cycles per operating
day, turn the Lower Line knob.
Note: Selecting 0 cycles will prevent the station from operating
during automatic watering operations.

Set Soak Time

Soak Time is an adjustable delay period that occurs between station
watering cycles to help promote deeper rooting, and to avoid pooling,
runoff and soil erosion. Soak Time is adjustable from 0–480 minutes in
10-minute increments.
Note: The Soak Time is actually the minimum delay that can
occur before the station can run again. The actual delay period
may be longer due to the programming variables of other stations
assigned to the same watering program.
1. Turn the Upper Line knob to select Set Soak Time.
SET SOAK TIME
30 Minutes
2. The default Soak Time is 30 minutes. To adjust the soak time,
turn the Lower Line knob (00–480 minutes).
STA 1
STA 01
35