Chapter 3 - Set Program Schedule; Select Program - Toro 24 User Manual

Chapter 3
Set Program Schedule
The Intelli-Sense Professional Controller enables four independent
program schedules (A, B, C and D) to be defined by one or two start
times with associated water window and a specific watering day
schedule. Each station is then assigned to one of the programs in
the Station Data function.
!
Important: When the STACK option is selected within the
Setup menu, the start time and water window parameters
defined for Program A will apply to all progams, and can not
be edited by individual program.
If the OVERLAP option is selected, separate start time and
water window parameters can be defined for each program.

Select Program

1. Turn the Function dial SCHEDULE to view the following
display:
SELECT PROGRAM
A (Optm S12:00am W16:00)
Program A is selected by default. The current watering day
schedule, start time and water window information is shown
for Program A.
Note: The abbreviated display information indicates the following:
Optm = Watering day schedule is Optimized by WeatherTRAK
S12:00am = Start Time is 12:00 a.m.
W16:00 = Water window duration is 16 hours.
2. To change the program selection, turn the Lower Line knob to
select program B, C or D.
17