Table of Contents
Advertisement
Using the Review Function
The Review function provides a convenient, at-a-glance overview
of all relavent station and flow monitro setup information.
1.
Turn the Function dial to the REVIEW position. Review Mode will
be displayed.
REVIEW MODE
Station Data
2.
Station Data is selected by default. To select Flow Data, turn the
Lower Line knob. (Refer to Flow Data Review on page 37.)
Station 1 will be selected by default. To select a differ ent station
3.
to review, turn the Upper Line knob.
The review information is displayed in an abbrevieated format that
allows the information to viewed in one screen as shown in the
example below.
1
ST01 A 11.9 MIN 01X AUTO
Wk1:-––T-–
(1) Station number 1 is assigned to watering Schedule A.
(2) The station will water for 11.9 minutes, one cycle per day.
(3 Automated by WeathTRAK is the assigned station mode.
If the station mode is User-No ET, User will be displayed.
UwET indicates station is assigned to User with ET mode.
(4) The active watering day schedule for Week 1 is Thursday.
Note: The remainder of the 8-week watering day schedule can be
viewed by turning the Lower Line knob.
(5) The % Adjust factor is +00%.
(6) Soak time is set for 30 minutes.
Note: Additional review information can be acquired for each station
by pressing the Copy button when the Fucntion dial is in the
STATION DATA position.
38
2
+00% Soak 30
4
5
3
6
Advertisement
Table of Contents
