Table of Contents
Advertisement
3.6.2.9 USB Configuration
The USB Configuration menu helps read USB information and configures USB settings.
Item
USB transfer time-out
Device reset time-out
Device power-up delay
Mass Storage Devices
Options
1 sec
5 sec
The time-out value for Control, Bulk, and
10 sec
Interrupt transfers.
20 sec[Default]
10 sec
20 sec[Default]
USB mass storage device Start Unit command
30 sec
time-out.
40 sec
Maximum time the device will take before it
properly reports itself to the Host Controller.
Auto[Default]
'Auto' uses default value: for a Root port it is
Manual
100ms, for a Hub port the delay is taken form
Hub descriptor.
Mass storage device emulation type. 'AUTO'
Auto[Default]
Floppy
enumerates devices according to their media
Forced FDD
format. Optical drives are emulated as
'CDROM', drives with no media will be
Hard Disk
CD-ROM
emulated according to a drive type.
User's Manual
Description
ECM-CFS User's Manual 45
Advertisement
Table of Contents
