Amt Configuration - Avalue Technology ECM-SKLH User Manual

Item
Serial Port
UART 232 422 485

3.6.2.4 AMT Configuration

Item
Intel AMT
BIOS Hotkey Pressed
MEBx Selection Screen
Un-Configure ME
Option
Enabled[Default],
Disabled
UART 232[Default]
UART 422
UART 485
Options
Disabled
Enabled[Default],
Disabled[Default]
Enabled,
Disabled[Default]
Enabled,
Disabled[Default]
Enabled,
Description
Enable or Disable Serial Port (COM).
Change the Serial Port as
RS232/422/485.
Description
Enable/Disable Intel® Active Management
Technology BIOS Extension. Note: iAMT
H/W is always enabled. This option just
controls the BIOS extension execution. If
enabled, this requires additional firmware in
the SPI device.
OEMFLag Bit 1: Enable/Disable BIOS
hotkey press.
OEMFLag Bit 2: Enable/Disable MEBx
selection screen.
OEMFlag Bit 15: Un-Configure ME without
password.
ECM-SKLH User's Manual 39
User's Manual