New Calls; Consulting The Call List; Calling A Number From The Call List; Erasing A Number From The Call List - Topcom Butler 2800 User Manual

HL_B2800_scan.book Page 49 Friday, August 29, 2003 1:28 PM
Topcom Butler 2800

6.1 NEW CALLS

When you've received a new unanswered call, the CLIP symbol

6.2 CONSULTING THE CALL LIST

• Press the Call Log button
on the display.
• The following will be shown on the display:
Progress number
• After 5 seconds, the telephone number will be shown. You can skip the date/time by pressing the
• Use the left scroll key
• You can leave the Call list by pressing the
* ONLY WHEN THE NETWORK SENDS THE TIME/DATE TOGETHER WITH THE TELEPHONE NUMBER!!! On
some networks with caller ID, time and date will not be displayed

6.3 CALLING A NUMBER FROM THE CALL LIST

• Scroll through the Call list until the desired number is shown on the display.
• Press the Line button . The number will be dialled automatically.

6.4 ERASING A NUMBER FROM THE CALL LIST

• Scroll through the Call list until the desired number is shown on the display.
• Press and hold the Mute button

6.5 STORE A NUMBER FROM THE CALL LOG INTO THE MEMORY

• Scroll through the Call list until the desired number is shown on the display.
• Press and hold the Memory button
• Enter the memory location (0-9) where you want to store the number
• Enter the Memory button

7. REGISTER/DE-REGISTER A HANDSET

7.1 REGISTER TO A TOPCOM B2800/2820 BASE

You can subscribe 5 handsets to one base unit. By default, each handset is subscribed as handset 1 on the base unit
upon delivery (base unit 1).
!!! You only need to subscribe the handset if: !!!
• The handset subscription has been removed from the base unit (e.g. for reinitialisation)
• You want to subscribe a different handset to this base unit.
The underlined procedure is only applicable to a Topcom Butler 29xx, 2800, 2820 handset and base unit!!
Keep the Paging key on the base unit pressed for 10 seconds until the Line/Charge indicator
on the base unit begins to blink rapidly. The Line/Charge indicator will blink rapidly
for one minute. During this minute, the base unit is in register mode and you must do the
following to subscribe the handset:
Topcom Butler 2800
. The last received call is shown on the display. If the list is empty, 'NO CLIP' is shown
Date (DD-MM) *
to scroll to the previous call. Use the
button.
for 3 sec. to erase the number.
for 3 sec.
again to confirm and to go back to standby
will blink on the display.
Time (24h format) *
button to show the next call.
button.
49