Command access MLRK1 Insert Instructions page 5
Field installable motorized latch-retraction kit for mlrk1-ts - town steel 1100 series devices, mlrk1-uscan - uscan2100 series devices, mlrk1-lsda2 - idn lsda 9200 series devices
Hide thumbs
Also See for MLRK1:
- Insert instructions (10 pages) ,
- Instructions manual (7 pages) ,
- Installation instructions (5 pages)
Advertisement
Installation Instructions
C.
Grabbing the motor kit with the attaching hooks facing down move it towards the PIN at 90°. Grab onto the bottom
5.
pin and begin to bring the back of the motor down.
11.
Continue bringing the motor down until it's to
the back of the baserail.
13.
Once the kit lines up with the screw holes, install the (2) Phillips
screws provided using a magnetic tip screw driver.
U S c u s t o m e r s u p p o r t 1 - 8 8 8 - 6 2 2 - 2 3 7 7 | w w w . c o m m a n d a c c e s s . c o m | C A c u s t o m e r s u p p o r t 1 - 8 5 5 - 8 2 3 - 3 0 0 2
12.
Slide motor bracket underneath baserail into the
exsisting groves. If neccessary, pull motor back to clear
the back of the baserail
Advertisement
