Download Print this page

Ricoh 3800C Installation Manual page 2

Paper feed unit, 500 x 2, for machine code: g060/g080/g082
Hide thumbs Also See for 3800C:

Advertisement

Take out the packaged items, making sure there are two
thumb screws and one mounting bracket. Close the tray of
the 1000-sheet paper feed unit firmly.
Slowly pull out Tray 2 while lifting up a little.
Fasten one thumb screw. A coin can be used to fasten the
screws.
Slowly slide Tray 2 back into the printer, until it stops.
Open the right cover of the 1000-sheet paper feed unit.
ZDJP005J
ZHXH853J
ZDJP015J
ZHXH050N
Printed in Japan
Hook the mounting bracket to the hole, as shown.
Fasten the bracket with the other thumb screw. A coin can
be used to fasten the screws.
Close the right cover of the 1000-sheet paper feed unit.
Stick labels "3" and "4" above the handles on the front of
the 1000-sheet paper feed unit.
Note
After finishing the installation, you can check the 1000-sheet
paper feed unit is installed properly: Print the configuration
page from the "List/Test Print" menu. If it is installed properly,
you will see "Paper Feed Unit (Tray 3 & Tray 4)" appear under
the "Options" list. (G060, G080)
After finishing the installation, you can check the 1000-sheet
paper feed unit is installed properly: Print the configuration
page from the "Print Menu" menu. If it is installed properly, you
will see "Tray 3" and "Tray 4" appear under the "Paper Tray
Information" list. (G082)
If the paper feed unit is not installed properly, repeat the
procedure from step
. If you cannot install it properly even
after reinstallation, contact your sales or service representative.
Copyright © 2001, 2002
ZHXH060N
ZDJP018J
ZDJP127J
G568-8600B

Advertisement

loading