Table of Contents
Advertisement
CAUTION
Hazardous substances
Chemical substances required for the setup, operation and maintenance of machines can present a health risk.
Read the information in these operating instructions and the product information supplied by the manufacturer.
•
Observe the relevant safety regulations and wear the personal protective equipment specified.
•
CAUTION
Flammable substances
Chemical substances required for the setup, operation and maintenance of machines may be flammable.
Burns and other damage to health and material may result.
Read the information in these operating instructions and the product information supplied by the manufacturer.
•
Observe the relevant safety regulations and wear the personal protective equipment specified.
•
Interference to electronic devices caused by electrical power equipment
Electrical power equipment generate electric fields during operation. Potentially lethal malfunctions can occur in medical
implants, e.g. pacemakers, in the vicinity of electrical power equipment. Data may be lost on magnetic or electronic data
carriers.
● It is forbidden for people with pacemakers to enter the vicinity of the machine.
● Protect the personnel working in the plant by taking appropriate measures, such as erecting identifying markings, safety
barriers and warning signs and giving safety talks.
● Observe the nationally applicable health and safety regulations.
● Do not carry any magnetic or electronic data media.
3
Description
3.1
Applications
3.1.1
Intended use
Intended use of the machines
These machines are intended for industrial installations. They comply with the harmonized standards of the series
EN / IEC 60034-1 (VDE 0530, IS 12615). It is prohibited to use these motors in hazardous zones if the marking on the rating
plate does not explicitly permit line or converter operation. If other/more wide-ranging demands (e.g. protection so that they
cannot be touched by children) are made in special cases – i.e. use in non-industrial installations – these conditions must be
ensured by the customer.
Note
Machine directive
Low-voltage motors are components designed for installation in machines in accordance with the current Machinery
Directive. Commissioning is prohibited until it has been absolutely identified that the end product is in conformance with this
Directive. Please observe the EN / IEC 60204-1 standard.
WARNING
Risk of explosion
This machine is not designed for use in hazardous areas. An explosion can occur if the machine is operated in these
areas. This can result in death, serious injury or material damage.
Never operate this machine in hazardous areas.
•
1LE7
A5E36065207, 04/2018
3
Advertisement
Table of Contents
