Topcom ORBIT User Manual page 12

Using the telephone
Redial a number from the dialled call list
You can redial up to 20 of the last numbers called. If you have stored a name in the
phonebook to go with the number, the name will be displayed instead.
See also "7.11 Redial length" .
3.6 Receiving a telephone call
When you receive an external call, the screen displays "External Call". To take the call:
You can turn the ring volume off during incoming call by selecting "Silence".
3.7 Handsfree mode
Handsfree lets you talk to your caller without holding the handset. It also enables other
people in the room to listen to both sides of your conversation.
3.8 Adjust earpiece/handsfree volume
You cannot set the earpiece/handsfree volume independently.
12
1 Press the redial key.
2 Select a number. If the number is in the phonebook, the name will
be shown.
3 Press the off-hook key to start the call or select "Options".
4 If you selected "Options", scroll and select:
"Show Details": To show the details;
"Save Number": to store the number into the phonebook;
"Send Message": to send a message;
"Delete Call": to remove the number from the call list.
5 Confirm selection.
6 Press the on-hook key to return to standby.
1 Press the off-hook key.
OR
Lift the handset off its base if you have activated "Auto Talk".
(See "7.9 Autotalk")
The call duration is displayed after 15 seconds.
2 Press the on-hook key to hang up or put the handset back on the
base.
1 To switch any call to handsfree, press the handsfree key during the
call.
1 Press up or down to select volume 1-8 during a normal or handsfree
call.