Setting The Volume; Paging; Keypad Lock; Out Of Range Warning - Topcom COCOON 115 115 User Manual

8
• Press the Mute button
be deactivated. The MUTE symbol
• Press the Mute button

5.7 Setting the volume

During a conversation you can set the volume by pressing the Line button
'Loud Hi/Lo' appears on the display.

5.8 Paging

When you press the Paging button on the base unit, the handset emits a ringing signal for
25 seconds. This signal helps you find a lost handset. The symbol
unit. The message "BASE PAGE" appears on the display.

5.9 Keypad lock

When the keypad is locked, the keypad buttons can no longer be pressed, except for the Set
button .
• Press the Set button
• Press numerical button '7'.
• Press:
'1' to lock the keypad and press the Memory button
'unHold=49' are shown on the display.
'2' to unlock the keypad and press the Memory button
Remark: You can temporarily release the keypad lock by pressing '4' and '9'. The
keypad lock is automatically active again when the keypad is idle for 10 seconds.
Default setting: no keypad lock.

5.10 Out of range warning

When the handset is out of the working range of the base unit during a conversation,
the unit will emit a warning signal every two seconds to warn the user that he has to move
closer towards the base unit. If the user is not in the working range of the base unit within
10 seconds, the connection will be broken.

5.11 Flash button (R)

When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms). It gives you the possibility to use the special services of your telephone provider
and/or to transfer calls when you have a telephone exchange.

5.11.1 Setting the Flash time

• Press the Set button
• Press '2'
• The actual flash time is shown on the display.
• Press:
• Press the Memory button
during a conversation. The microphone will
again when you want to continue the conversation.
.
.
'1' = 100ms
'2' = 115ms
'3' = 270ms
'4' = 600ms
to confirm.
appears on the display.
to confirm. The
COCOON 115
. The indication
blinks on the base
icon and
button to confirm.