Installation - KitchenAid KECC586G Manual

WARNING
Excessive Weight Hazard
Use two or more people to move and
install the cooktop.
Failure to do so can result in back or
other injury.
1. Remove the shipping materials and tape
from the cooktop. Remove the hardware
package from inside the literature bag.
2. Insert the cooktop into the countertop and
center it in the cutout. Position the front of
the cooktop so that it is parallel to the front
edge of the countertop. Make sure that all
of the required clearances are met. NOTE:
If cooktop is not properly positioned, lift the
cooktop off the countertop to make the
necessary adjustments.
All manuals and user guides at all-guides.com

INSTALLATION

2-3
3. Insert one clamp tab through each slot lo-
cated on sides of the burner box. NOTE: If
installing the cooktop over a built-under
oven, Do Not fasten the cooktop to the
countertop with clamps. The cooktop will
then be easy to remove if servicing is ever
required.
screw
countertop
clamp &
screw
assembly
4. Secure the cooktop to the countertop by
hand-tightening each screw, then use a
screwdriver to tighten each screw by 1 to
1-1/2 more turns. Do Not overtighten
screws.
5. Make the electrical connections as in-
structed in the "Electrical Connections"
beginning on page 2-2.
6. Turn on the power supply to the cooktop.
7. Touch "ON" and set each element to the
"Hl" position. Check the operation of the
cooktop elements and touch-control indi-
cator lights.
clamp
cooktop
slot
clamp tab
burner box