Table of Contents
Advertisement
3.3 Connectors description
®
3.3.1
Qseven
Connector
®
According to Qseven
specifications, all interface signals are reported on the card edge connector, which is a 230-pin Card Edge that can be inserted into
standard 230 pin MXM connectors, as described in Qseven
Not all signals contemplated in Qseven
Therefore, please refer to the following table for a list of effective signals reported on MXM connector. Please be aware that on signals' description, Input and
Output (if specifically written) are referred to the Qseven
respectively, outputs and inputs).
NOTE: Even pins are available on top side of Qseven
BOTTOM SIDE
Description
Power Ground
Gigabit Ethernet differential pair 3-
Gigabit Ethernet differential pair 3+
Ethernet 100Mb/s link indicator
Gigabit Ethernet differential pair 1-
Gigabit Ethernet differential pair 1+
Ethernet Reference Voltage
Wake Input
Suspend Status Output
Sleep Button Input
Power Ground
Power Ground
Battery Low Input
Serial ATA Channel 0 Transmit +
CQ7-A42
CQ7-A42 - Rev. First Edition: 1.0 - Last Edition: 2.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
®
specifications.
®
standard are implemented on MXM connector, due to the functionalities really implemented on CQ7-A42 CPU module.
®
module, i.e. they are inputs and outputs of the module itself, not of the carrier board (where they are,
®
module; odd pins are available on bottom side of Qseven
Qseven
®
Pin name
Pin nr.
GND
GBE_MDI3-
GBE_MDI3+
GBE_LINK100#
GBE_MDI1-
GBE_MDI1+
N.C.
GBE_CTREF
WAKE#
SUS_STAT#
SLP_BTN#
GND
GND
BATLOW#
SATA0_TX+
Connector - CN1
Pin nr.
Pin name
1
2
GND
3
4
GBE_MDI2-
5
6
GBE_MDI2+
7
8
GBE_LINK1000#
9
10
GBE_MDI0-
11
12
GBE_MDI0+
13
14
GBE_ACT#
15
16
SUS_S5#
17
18
SUS_S3#
19
20
PWRBTN#
21
22
LID_BTN#
23
24
GND
25
26
PWGIN
27
28
RSTBTN#
29
30
SATA1_TX+
®
module.
TOP SIDE
Description
Power Ground
Gigabit Ethernet differential pair 2-
Gigabit Ethernet differential pair 2+
Ethernet 1000Mb/s link indicator
Gigabit Ethernet differential pair 0-
Gigabit Ethernet differential pair 0+
Ethernet Activity indicator
Soft Off (S5) output Signal
Suspend to RAM (S3) output signal
Power Button Input
LID Button Input
Power Ground
®
QSeven
module Power Good Input
Reset Button Input
Serial ATA Channel 1 Transmit +
21
Advertisement
Table of Contents
