Related Manuals for Modular Closets HUTCH
Summary of Contents for Modular Closets HUTCH
- Page 1 1-844-969-4247 HUTCH ASSEMBLY AND INSTALLATION INSTRUCTIONS...
-
Page 2: Finished Edge
ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH FINISHED EDGE FINISHED EDGE... -
Page 3: Tools Required
ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH TOOLS REQUIRED (not included unless noted) Level Stud Finder Drill, 5/32" bit size Phillips Screwdriver PARTS LIST Left Side Panel, Base (Qty 1) Right Side Panel, Base (Qty 1) Top Shelf, Base (Qty 1) Set Shelf, Base (Qty 1) - Page 4 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH Lay parts out on a protective surface to prevent damage. Tip: Spread out the cardboard packaging to use as a protective surface. Inventory parts against the Parts List. Make sure all parts are present before proceeding.
-
Page 5: Important Notes
ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 4.1 Assemble Base Set Shelf (D), Rear Hanging Cleats (I) and Toe Kick (J) onto Base Right Side Panel (B) by sliding the Shelves, Cleats and Toe Kick onto Cam Posts (K) on Right Side Panel. BE SURE dowel pins in Shelves, Cleats and Toe Kick engage drilled holes in Right Side Panel, and all parts are pressed flush against Panel. - Page 6 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 5.1 Install Base Left Side Panel (A) onto assembled Set Shelf (D), Rear Hanging Cleats (I) and Toe Kick (J). BE SURE dowel pins in Shelf, Cleats and Toe Kick engage drilled holes in Side Panel, and Side Panel is pressed...
- Page 7 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH ARROW TOWARD CAM POST OPENING Insert Camlocks (L) in holes in Set Shelf (D), Rear Hanging Cleats (I) and Toe Kick (J) with arrow pointing toward Cam Post opening. Be sure Camlocks engage Cam Posts, and are fully seated in Shelf, Cleats and Toe Kick.
- Page 8 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH ARROW TOWARD CAM POST OPENING Insert four Wood Dowels (N) into holes in edges of Base Left Side Panel (A) and Base Right Side Panel (B). Install Base Top Shelf (C) onto assembled Base. BE SURE dowel pins in Base Left Side Panel (A) and Base Right Side Panel (B) engage drilled holes in Top Shelf, and Top Shelf is pressed flush against Side Panels and Rear Hanging Cleat (I).
- Page 9 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 8.1 Install one Cam Post (K) into each of the 6 holes on Upper Left Side Panel (E) and Upper Right Side Panel (F). Tighten until Cam Posts are seated against Side Panels. 9.1 Assemble Upper Set Shelf (G) and Rear Hanging...
- Page 10 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 10.1 Install Upper Left Side Panel (E) onto assembled Set Shelf (G) and Rear Hanging Cleat (I). BE SURE dowel pins in Shelf and Cleat engage drilled holes in Side Panel, and Side Panel is pressed flush against Set Shelf and Cleat.
- Page 11 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 12.1 Insert four Wood Dowels (N) into holes in edges of Upper Left Side Panel (E) and Upper Right Side Panel (F). 12.2 Install assembled Upper Shelf onto assembled Base. BE SURE dowel pins in Upper Left Side...
-
Page 12: Installation
ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH PILOT HOLES STUDS PILOT HOLES INSTALLATION 13.1 Determine the mounting location for the unit. 13.2 Using a stud finder, locate studs to which the unit will be secured. Mark stud locations with a pencil. 13.3 With the unit positioned at the desired location, level the unit, then drill pilot holes through Rear Hanging Cleats (C). - Page 13 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 14.1 Secure Rear Hanging Cleats (I) to studs using six 2.5" screws (O).
- Page 14 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 15.1 Insert 8 Shelf Pins (M) into pin holes at the desired heights. 15.2 Rest Adjustable Shelves (H) on Shelf Pins (M).
- Page 15 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 16.1 Insert Wood Dowels (BB) into holes in ends of Front Drawer Panel (P) and Rear Drawer Panel (Q). 17.1 Align Wood Dowels in Front Drawer Panel (P) and Rear Drawer Panel (Q) with holes in one Side Drawer Panel...
- Page 16 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH NOTE: Be sure to install Drawer Bottom (T) with finished side facing up. 18.1 Align Drawer Bottom (T) with slots in Front Drawer Panel (P) and Rear Drawer Panel (Q), then slide Drawer Bottom into assembled Drawer Panels until Drawer Bottom is seated against Side Drawer Panel (R).
- Page 17 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 20.1 Secure Side Drawer Panels (R) to Front Drawer Panel (P) and Rear Drawer Panel (Q) using 1.0" Drawer Side Screws (Z). 21.1 Position Drawer Slide (U) against Side Drawer Panel (R), then secure with two 5/8" Drawer Slide Screws (Y) at locations shown.
- Page 18 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH NOTE: DO NOT overtighten Screws (Z) or surface of Drawer Front (D) may become dimpled. 22.1 Position Drawer Front (S) on assembled Drawer and secure to Front Drawer Panel (P) with 1.0" Screws (Z). 22.2...
- Page 19 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 23.1 Position Shelf Slide (V) over pre-drilled holes in Base Side Panel, then secure with two 5/8" Screws (Y) at locations shown. 23.2 Repeat for second Shelf Slide (V). Tip: For best results, use a small level to ensure Shelf Slides (V) are properly positioned before tightening.
- Page 20 ASSEMBLY AND INSTALLATION INSTRUCTIONS HUTCH 24.1 Slide Drawer onto Shelf Slides until slides latch. 24.2 Repeat steps 16 through 24 for the remaining four drawers.