Rack-Mounting The System - Lanner NCA-1513 User Manual

NCA-1513 User Manual

Rack-mounting the System

With the rack mount kit, this system can be fixed onto rack posts. Please contact Lanner's sales
representative for purchasing this kit.
What's in the Rack-mount Kit
Check the kit for the following items:
2x Ear Bracket
1x Adapter Bracket
1x Adapter Holder
Screws for the fixture of the Brackets and
the Holder
Rack-mounting Screws
Attaching the Assembly to the Chassis
1. On one side of the system, align the ear
bracket to the screw holes on the side
panel and fix it using three screws.
2. Secure the other ear bracket to the other
side of the system.
3. Fix the adapter holder to the left side panel using two screws.
4. The adapter holder assembly is designed to secure a 5V adapter or a 3V adapter. Secure the adapter
onto the holder with the adapter bracket and two provided screws. Make sure the way you place the
bracket is as shown in the picture.
5. Attach the power adapter's connector to the power supply jack on the system's rear panel.
6. Secure the adapter's cable onto the adapter holder.
Ear Bracket
Screws
1
27
Adapter Bracket
Screws
(for Rack-mounting)