Chapter 2 Hardware Installation - Lanner NCA-1513 User Manual

CHAPTER 2 HARDWARE INSTALLATION

To reduce the risk of personal injury, electric shock, or damage to the equipment, please remove all power
connections to completely shut down the device. Also, please wear ESD protection gloves when conducting
the steps described hereafter.
This system supports multiple wireless connectivity methods with two M.2 slots and an MPCIE slot. Based
on your application and modules used, install modules in the corresponding slots.
For 2242 M.2 SSD module, insert
the plastic spacer
mounting hole on MB to secure the
module.
2280
pull the clip of
To secure the module,
the spacer open while pressing
down on the card. After you
release the clip, it will bounce back
to fasten the card.
into the
2242
M.2 2280/2242
SATA signal (B key)
M.2
(SSD)
M.2
(LTE)
M.2 3042
USB3.0 signal (B key)
24
Chapter 2 Hardware Installation
System
Memory
DDR4-2400
Up to 16GB ECC
or Non-ECC
Mini-PCIe
SIM
(Wi-fi)
mPCIE
PCIe/USB2.0 signal
Nano SIM
For M.2 LTE