Rear Wheel Removal And Reassembly - TVS Sport Owner's Manual

MAINTENANCE
R E A R W H E E L R E M O V A L A N D
REASSEMBLY
1. Remove the rear brake adjuster nut (1) and
disconnect the brake rod.
2. Remove the split pin (2) and the nut (3) from the
torque link mounting with the brake panel and
disconnect the torque link.
3. Remove the axle nut (4).
4. Pull out the axle (5) and take out the spacer
bush from the rear wheel assembly.
4
1 3 2
5
-43-
5. Tilt the vehicle to the left and take out the wheel
along with the brake panel. Separate the brake
panel from the wheel.
6. For locating and reassembling the rear wheel
easily, engage the gear. This will arrest the free
movement of the drum sprocket.
7. Reverse the procedure for reassembly.
Caution
Once the split pins are removed, replace them with
new ones.