Table of Contents
Advertisement
Illumilift RGBW Turbo
Warning
Power the device up ONLY when the LED sphere IS INSTALLED.
Power the device up ONLY when the controller is in VERTICAL position.
The built-in winch system resets itself upon each start-up. If the controller is not in vertical
position and/or the LED sphere is not installed, it may result in twisting of the cable that may
cause damage to the built-in winch system and the warranty will become void.
Before powering the Illumilift up, always make sure that:
●
the controller is positioned VERTICALLY.
●
the LED sphere is installed and secured by means of the safety eye.
●
the cable tie, keeping the hoisting cable in position, is removed.
●
the hoisting cable is not loose.
●
the maximum cable load (2 kg) is not exceeded.
●
the movement of the Illumilift is not interrupted in any way.
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
●
Showtec Illumilift RGBW Turbo
●
LED sphere (35 cm)
●
Pro power cable (1,7 m)
●
2 x mounting bracket
●
User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Order code: 41166
2
Advertisement
Table of Contents
